Digital Indicator EI2041

Request a Quotation Make an Inquiry

EI2041

The EI2041 indicator has linear mA and V input, rescaled for accurate display of process data.

With selectable input types, easy-to-adjust sampling time and various options for display, the EI2041 can be set up to meet a user's specific needs.

  • 4 digit display
  • Scale adjustable between -1999 and 4000
  • Adjustable decimal point 0000, 000.0, 00.00 or 0.000
  • Measurement unit display
  • Four selectable input types (0-20mA, 4-20mA, 0-1V, 0-10V)
  • Input calibration
  • Adjustable sampling time
  • Min and max values can be stored on the display
  • Two relay outputs for control and alarm (optional)
  • Above and below setpoint value can be set
  • RS485 Modbus RTU communication protocol feature (optional)
  • Selectable independent, deviation and band alarm
  • Sensor supply output (optional)
  • 35 x77mm format (29 x 71mm cutout)

 

Product Category: Indicator
Control type: Alarm signal
Hysteresis: Adjustable between 1...200.
Supply voltage: 230V AC +%10 -%20, or 12/24V AC ±%10 50/60Hz or 9-30V DC / 7-24V AC ±%10, SMPS optional
Display: 4 digits, 12.5mm, 7 segment LED
Input: 0-1V DC voltage
0-10V DC voltage
0-20mA DC current
4-20mA DC current
Sensor supply output: 12V D 50mA
8V DC 50mA
5V DC 50mA
Out/Alarm output: Relay : 250V AC, 8A (for resistive load), NO; 1/2 HP 240V AC CosF = 0.4 (for inductive load)
Dimensions: W77xH35xD71mm
Safety requirements: EN 61010-1: 2010 (Pollution degree2 , overvoltage category II)
EMC: EN 61326-1: 2006
Protection class: According to EN 60529; Front panel: IP65 Rear panel: IP20
Ambient/storage temperature: 0 ... +50°C/-25... +70°C (with no icing)
Brochure Datasheet - Manual
Product Catalog Brochure Thumb